CITROËN C4 Owner's Manual page 166

Displays on the instrument panel
- The selector position is displayed
in the instrument panel, on the
left on multifunction screens A
and C and on the right on the
NaviDrive multifunction screen.
- A background-lit position grille
associated with the selector al-
lows you to view the position se-
lected.
When the ignition is on,
lighting of
IX
warning lamp, accompa-
nied by an audible signal and
the message "Gearbox faulty"
indicates a malfunction.
Consult a CITROËN dealer.
For safety:
 Position N can only be disen-
gaged if you are pressing the
brake pedal.
 If the gearbox is in position N
but the selector position is dif-
ferent, reposition the selec-
tor on N in order to be able to
start.
134
Moving off
 To start the engine, the selector
has to be in position N .
 Press fi rmly on the brake pedal.
 Operate the starter.
 When the engine is running,
place the selector on R , A or M
as desired.
 Check, in the instrument panel,
the position engaged.
the service
 Release the brake pedal and ac-
celerate.
If the selector is not in position N ,
and/or if the brake pedal is not and/or if the brake pedal is not and/or if the brake pedal is not and/or if the brake pedal is not and/or if the brake pedal is not and/or if the brake pedal is not and/or if the brake pedal is not
Copyright Copyright Copyright Copyright
pressed, the corresponding warning pressed, the corresponding warning pressed, the corresponding warning pressed, the corresponding warning pressed, the corresponding warning pressed, the corresponding warning pressed, the corresponding warning pressed, the corresponding warning pressed, the corresponding warning
lamp(s) are displayed and a mes- lamp(s) are displayed and a mes- lamp(s) are displayed and a mes- lamp(s) are displayed and a mes- lamp(s) are displayed and a mes-
sage informs you that at least one of
these two conditions is not met.
In this case, the engine will not start,
recommence the above procedure.
D R I V I N G
CITROEN CITROEN CITROEN - Compiled Compiled Compiled Compiled
Reverse gear
Engaging reverse gear
To engage reverse gear, move the
selector to R .
Only attempt to select reverse gear
when the vehicle is stationary.
If the vehicle is moving rapidly, if an in-
advertent attempt to engage reverse
gear is made, the warning lamp N will
fl ash and your vehicle will go auto-
matically into neutral. To re-engage a
gear, you have only to reposition the
selector on A , M or R .
Neutral
Changing to neutral
To change to neutral, move the se- To change to neutral, move the se- To change to neutral, move the se- To change to neutral, move the se- To change to neutral, move the se-
by by by C4owners.org C4owners.org C4owners.org C4owners.org C4owners.org
lector to N . If the vehicle is moving, lector to lector to lector to lector to N N . If the vehicle is moving, . If the vehicle is moving,
do not select this position even mo-
mentarily.