The roller has a moving fl ap to
avoid interference with the second-
row passengers when the seats
are in the "reclined" position.
Position 2
7-seat confi guration; installed be-
hind the third-row seats when these
are folded away. This position con-
ceals objects stowed in the boot
from outside view.
Installing the roller
Roll up the blind, then remove
the roller from its initial position.
Position the roller, with the blind
pull bar uppermost, fl ap down-
ward.
Fold the concertina boards.
F I T T I N G S
Engage the lug on the left of the
roller in notch C .
Pass the right-hand side above
the third-row armrest.
Engage the lug in notch D .
Pull the seat belt(s) so that they
will deploy without locking.
Unroll the blind and engage the
guides into the rails on the pil-
lars.
Lock the seat(s) in position.
Removing the roller
Push the fl ap towards the seat
backrest.
Lift the concertina board by grab-
bing it at the side, then position it
vertically.
Unlock the seat by pulling the
strap E .
Push the backrest towards the
front.
Copyright
Copyright
CITROEN
CITROEN
Proceed in reverse order to in-
Proceed in reverse order to in-
Proceed in reverse order to in-
Proceed in reverse order to in-
Proceed in reverse order to in-
Proceed in reverse order to in-
Proceed in reverse order to in-
Proceed in reverse order to in-
Proceed in reverse order to in-
stalling.
The blind can only be stored when
the seats are folded away.
You can position the concertina
board vertically to lodge a bulkier
object in the boot well.
Position 3
7-seat confi guration; stowed behind
the third row seats when these are
folded away.
Installing the roller
Fold the concertina board.
Position the roller, with the blind
pull bar uppermost, fl ap down-
ward.
Engage the lug on the left of the
roller in notch C .
Pass the right-hand side above
the third-row armrest.
the third-row armrest.
the third-row armrest.
-
Compiled
Compiled
by
by
C4owners.org
C4owners.org
C4owners.org
Engage the lug in notch D .
Engage the lug in notch
Engage the lug in notch
Removing the roller
Proceed in reverse order to in-
stalling.
VI
101