Trip Computer Info; Vehicle Diagnostics Info - CITROEN C8 User Manual

05 TRIP COMPUTER
VEHICLE DIAGNOSTICS
Each press of the button, located at the end of the
wipers stalk , permits displaying of the different trip wipers stalk wipers stalk , permits displaying of the different trip
computer data in succession, depending on the
display.
9
- the "vehicle" tab with:
● the range, the current consumption and the distance remaining to the
destination,
- the "1" tab (route 1) with:
● the average speed, the average consumption and the distance travelled
calculated over route "1" ,
- the "2" tab (route 2) with the same characteristics for a second route .
Zero reset
When the required route is displayed, press the control for more
than two seconds.
9.80
A FEW DEFINITIONS
displays the distance which can be travelled with the remaining
RANGE:
fuel detected in the tank, in relation to the average consumption over the
last few miles (kilometres).
THIS DISPLAYED VALUE MAY VARY SIGNIFICANTLY FOLLOWING A CHANGE
IN THE VEHICLE SPEED OR THE RELIEF OF THE ROUTE.
When the range falls below 20 miles (30 km), dashes are displayed. After
fi lling with at least 5 litres of fuel, the range is recalculated and is displayed
when it exceeds 60 miles (100 km).
If, whilst driving, dashes are displayed continuously in place of digits, If, whilst driving, dashes are displayed continuously in place of digits, If, whilst driving, dashes are displayed continuously in place of digits,
contact a CITROËN dealer. contact a CITROËN dealer.
only calculated and displayed above 20 mph
CURRENT CONSUMPTION:
(30 km/h).
this is the average quantity of fuel consumed
AVERAGE CONSUMPTION:
since the last trip recorder zero reset.
calculated since the last trip computer zero reset.
DISTANCE TRAVELLED:
DISTANCE REMAINING TO THE DESTINATION:
to the fi nal destination, entered by the user. If guidance is activated, the
navigation system calculates it as a current value.
this is the average speed calculated since the last trip
AVERAGE SPEED:
computer zero reset (ignition on).
calculated with reference