Rear Head Restraints; Refitting The Centre Seat; Turning A Rear Seat Round - CITROEN C8 User Manual

Seats
Refi tting the centre seat
Check that there is no obstacle
obstructing the slides or
preventing correct locking of the
seat anchorages.

Turning a rear seat round

The rear seats can be placed in a "face
to face" position.
Carry out the operations described for
removal then turn the seat round and
resume with the procedure for refi tting
the seat .
1. Place the front anchorages at the
front stop in the slides. Support the
strap fi rmly for easier positioning of
the seat.
2. Tilt the folded seat towards the rear.
The rear anchorages lock.
3. Raise the seat back and slide the
seat.
This turning operation must be
carried out when stationary.
Driving with a passenger seated
facing the rear is prohibited.
When the vehicle is being driven,
placing a row 2 seat in the closed
position while a passenger is sitting
in row 3 is prohibited.

Rear head restraints

The rear head restraints can be
removed and have two positions:
- high, position for use,
- low, storage position.
To raise or lower a head restraint, pull
it forwards sliding it at the same time.
To remove it, place it in the high
position, push the lug and pull it
forwards and upwards.
To refi t it, engage the head restraint
rods in the holes taking care to remain
in the centreline of the seat back.
Never drive with the head
restraints removed, they must be
in place and correctly adjusted.