Manual Sensor Cleaning - Canon EOS 60D Instruction Manual

3
Manual Sensor CleaningN
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.

As power source, using the AC Adapter Kit ACK-E6 (sold separately) is
recommended.

If you use a battery, make sure it is fully recharged. If the battery grip with
size-AA/LR6 batteries is attached, manual sensor cleaning will not be
possible.
1 Select [Sensor cleaning].

Under the [6] tab, select [Sensor
cleaning], then press <0>.
2
Select [Clean manually]. Select [Clean manually]. Select [Clean manually].

Select [Clean manually], then press Select [ Select [Clean manually Clean manually
0 0
< < <0>. >. >.
3 3 3
Select [OK].

Select [OK], then press <0>.

In a moment, the reflex mirror will
lockup and the shutter will open.

"CLn" will blink on the LCD panel.
4
End the cleaning.

Set the power switch to <2>.
233