F Using The Remote Switch - Canon EOS 60D Instruction Manual

F: Bulb Exposures
Using the Eyepiece Cover
If you take a picture without looking at the viewfinder, light entering the
eyepiece can throw off the exposure. To prevent this, use the eyepiece
cover (p.23) attached to the camera strap.
During Live View shooting and movie shooting, attaching the
eyepiece cover is unnecessary.

F Using the Remote Switch

Using the Remote Switch Using the Remote Switch
Remote Switch RS-60E3 (sold separately) comes with an approx. Remote Switch RS-60E3 (sold separately) comes with an approx. Remote Switch RS-60E3 (sold separately) comes with an approx.
60cm/2.0ft cord. When connected to the camera's remote control 60cm/2.0ft cord. When connected to the camera's remote control 60cm/2.0ft cord. When connected to the camera's remote control
terminal, Remote Switch RS-60E3 can be used to press the shutter
button halfway and completely.
124
1
Remove the eyecup.

Push the bottom of the eyecup to Push the bottom of the eyecup to Push the bottom of the eyecup to
remove.
2
Attach the eyepiece cover. Attach the eyepiece cover. Attach the eyepiece cover.

Slide the eyepiece cover down into Slide the eyepiece cover down into Slide the eyepiece cover down into
the eyepiece groove to attach it. the eyepiece groove to attach it. the eyepiece groove to attach it.