Canon EOS 60D Instruction Manual page 89

About "A" (Auto) ISO Speed
Shooting Mode
1/7/C/3/4/5/6
d/s/f/a
2
F
With flash
*1: Depending on the maximum ISO speed that has been set. *1: Depending on the maximum ISO speed that has been set. *1: Depending on the maximum ISO speed that has been set.
*2: If fill flash results in overexposure, ISO 100 or a higher ISO will be set. *2: If fill flash results in overexposure, ISO 100 or a higher ISO will be set. *2: If fill flash results in overexposure, ISO 100 or a higher ISO will be set.
*3: In the <d> and Basic Zone modes (except <6>), ISO 400 - 1600 will be set > and Basic Zone modes (except < > and Basic Zone modes (except <
automatically if bounce flash is used with an external Speedlite. If the automatically if bounce flash is used automatically if bounce flash is used
maximum ISO speed has been set to [ maximum ISO speed has been set to [ maximum ISO speed has been set to [400] or [800], the ISO speed will be set
within this limit.
3 Setting the Maximum ISO Speed for Auto ISON
Setting the Maximum IS Setting the Maximum IS
For Auto ISO, you can set the maximum ISO speed within ISO 400 - For Auto ISO, you can set the maximum ISO speed within ISO 400 - For Auto ISO, you can set the maximum ISO speed within ISO 400 -
6400. If you want better image quality with less noise, set the maximum
ISO speed to 400, 800, or 1600. If you will shoot in low light and want to
avoid using a slow shutter speed, set the maximum ISO speed to 3200
or 6400.
If the ISO speed is set to "A", the actual
ISO speed to be set will be displayed
when you press the shutter button
halfway. As indicated below, the ISO
speed will be set automatically to suit the
shooting mode.
ISO Speed Setting
Automatically set within ISO 100 - 3200 Automatically set within ISO 100 - 3200 Automatically set within ISO 100 - 3200
Automatically set within ISO 100 - 6400 Automatically set within ISO 100 - 6400 Automatically set within ISO 100 - 6400
Fixed at ISO 100 Fixed at ISO 100 Fixed at ISO 100
Fixed at ISO 400 Fixed at ISO 400 Fixed at ISO 400
*2*3
Fixed at ISO 400 Fixed at ISO 400 Fixed at ISO 400
Under the [y] tab, select [ISO Auto],
then press <0>. Select the ISO speed,
then press <0>.
i: Setting the ISO SpeedN
*1
89