Konica Minolta bizhub C652 Quick Manual page 114

2.4 Basic scan operation
% To directly type in the destination address, press [Direct Input], select the transmission method, and
then type in the destination address.
% A document can be sent to multiple destinations at the same time (Broadcast transmission). For
details on sending a document to multiple destinations, refer to page 6-21 of this manual.
% If necessary, press [Scan Settings], [Original Settings] or [Communication. Settings], and specify the
desired settings. For details, refer to chapter 5 of the User's Guide [Network Scan/Fax/Network Fax
Operations].
% Press the [Proof Copy] key before pressing the [Start] key to display the preview image of the
currently specified settings on the touch panel.
3
Position the document to be scanned.
4
Press the [Start] key.
% To scan multiple originals using the original glass, select [Separate Scan]. After scanning 1st page
of the original, load the 2nd page and press [Start] again. Repeat this process until all the pages
have been scanned.
After the last page has been scanned, press [Finish], and then press the [Start] key.
d
Reference
The network settings must be specified before scan data can be sent. Network settings should be specified
by the administrator. Network settings can also be specified by using PageScope Web Connection. For
easier operation, specify in advance any settings other than the network settings according to the desired
application.
For details, refer to chapter 2 of the User's Guide [Network Administrator]
C652/C652DS/C552/C552DS/C452
1
2
2
2-15