Electrolux W4400H Brochure & Specs page 4

Options
• Front-mounted hopper - for easy loading from e.g sling-bag system (manual).
• Backward and forward tilting device - backward tilting can be used together with hopper or another type of loading
system.
• Forward tilting device - for easy unloading with reversing drum into trolley.
• Noise/heat insulation - gives less airborne sound than 70 dB(A).
• Test tap with level tube - gives possibilities to take samples from the wash liquid.
• Water/solvent recovery drain- two drain valves to be able to recover water from the rinses and reuse it in the wash.
• Five-compartment supply injector, ive-compartments for powder detergent which can be programmed.
• Water inlet via pump-extra water inlet for water supply controlled by a pump from a recovery system.
• Third water valve-electrically controlled water valve for e.g hard water.
• Connection details for steam.
• Connection details for 2 water.
• Connection details for 3 water.
• Connection details pump inlet.
• Integrated Weighing System (IWS) – shows the weight of the load on the program display.
• Combined steam and electrical heated - gives possibilities to choose between electrical or steam heating by using
a switch.
• Oil lubrication of bearing gaskets with warning for empty container
Accessory
• Kit for connection to CMIS (Certus Management Information Systems) network. CMIS provides vital statistics,
error codes, maintenance intervals, process receipt, etc.
CMIS can be itted to washer extractors with Clarus Control, tumble dryers
with Selecta Control and ironers with electronic control system.
All you need to access and view the statistical feedback is a normal PC.
www.electrolux.com/professional
Share more of our thinking at www.electrolux.com