Dedicated Micros Digital Sprite 2 Setup Manual page 37

Spot Monitor text
It is possible to select the information that will be displayed on the Spot
monitor. The options are:
• None - switch all monitor text off (when used in conjunction with display
unit number).
• Clock only - display the time, date and mode of operation (Day,
Night, Weekend and Spot).
• Title only - display the camera number, the unit number, camera
title and the mode of operation.
• Both - display both the clock and title information.
Text Background
A black box appears by default behind the text. However it is possible to
switch this box off.
Sequence Dwell
The sequence dwell time can be set from 1 to 99 seconds. The dwell time is
the length of time a camera is displayed before switching to the next camera in
the sequence.
Tip: The cameras on the sequence can be edited by pressing and holding the
Sequence button in Live mode.
Multiscreen interlace
Turn multiscreen interlace off if images are flickering when viewed in a
multiscreen display.
Multiscreen titles
Camera titles can be removed when viewing in a multiscreen display.
Display unit number
When multiple units are controlled from a single keyboard (e.g. using a VS16
video switch), the unit number (in the System Options page) is displayed on
screen so the operator knows which unit they are controlling.
Base camera number
When using multiple units, it may be preferred that the camera numbers are
offset, for example, with two units the first unit would be camera 1 to 16
and the second 17 to 32, etc. This is for display purposes only.
35