Pmd-75 Motion Detector - Paradox Marine Magel 6130 Instalation Manual

PMD-75 Motion Detector

Typical Position: Salon, Stateroom, and
Hallway
Typical Zone Definition: Follow or Follow /
Stay
Power: 3 x "AAA"
Description: It is recommended that the
motion detector be mounted high up on the
wall or corner of your vessels interior. It
should focus on susceptible areas that could
be prone to break in. It is important not to
focus on areas that could cause false alarms
(i.e. focusing in areas that may have
movement thru glass).
Powering the Unit
1. Insert 3 "AAA" batteries into the battery
holder while verifying polarity (Diagram 16).
Diagram 16
2. Insert the battery holder into the back
cover and affix the battery connector to the
PCB (see "A1" and "A2" in Figure
Mounting
It is recommended that the motion detector
be mounted high up on the wall or corner of
your vessels interior. It should focus on
susceptible areas that could be prone to
break in. It is important not to focus on areas
that could cause false alarms (i.e. focusing
in areas that may have movement thru
glass). Temporarily mount the detector with
double sided tape and test that the location
is adequate with no possible false alarms.
Walk Test
Open the cover in order to trigger the anti-
tamper switch, and then snap the cover
back
22