Table Of Contents - NAPCO XP-400 Using Instructions

Introduction

Table of Contents

Keypad Controls and Indicators ................................
Arming your System (When Leaving) .......................
Bypassing Zones .....................................................
Protecting Yourself While Home ...............................
Emergency Keys .......................................................
Disarming the System ...............................................
Silencing an Alarm.....................................................
Special Functions .....................................................
10
Programming User Codes .........................................
System Troubles .......................................................
12
1
Bell / Battery Test
Test your bell or siren by pressing
This will cause the bell, or siren to sound for 2 seconds and
also initiate a test of the battery .
2
Central Station Communication Test
(This test should only be performed on weekends or at a
time designated by your alarm company)
1. Notify Central Station of the impending test.
4
5
6
6
7
8
9
9
11
Important - Test Your System Weekly !
1
A
followed by .
System Information
Central Station Phone Number: ____________________
Central Station Account Number: ____________________
For Service Call: ____________________
Entry Delay: ____________________
Exit Delay: ____________________
Alarm Time-out: ____________________
2. Secure all zones to light Ready Light on your keypad.
3. Enter your user code to Arm the system.
4. Violate your alarm by opening a window / door etc.
5. The siren or bell should sound and the system will send
the alarm signals to the Central Station
6 . Enter your user code to silence the bell or sounder.
7. Call Central Station to insure that the alarm signals were
received properly.