Electromagnetic Compatibility Emc - Leica GKL221 User Manual

_en_GKL221_User.book Page 25 Monday, April 11, 2011 2:30 PM
Warning
If the product is improperly disposed of, the following can happen:
•
•
•
Precautions:
Product specific treatment and waste management information can be downloaded from the Leica
Geosystems home page at http://www.leica-geosystems.com/treatment or received from your Leica
Geosystems dealer.
4.6

Electromagnetic Compatibility EMC

Description The term Electromagnetic Compatability is taken to mean the capability of the product to function
smoothly in an environment where electromagnetic radiation and electrostatic discharges are present,
and without causing electromagnetic disturbances to other equipment.
Warning
Electromagnetic radiation can cause disturbances in other equipment
Although the product meets the strict regulations and standards which are in force in this respect, Leica
Geosystems cannot completely exclude the possibility that other equipment may be disturbed.
25
If polymer parts are burnt, poisonous gases are produced which may impair health.
If batteries are damaged or are heated strongly, they can explode and cause poisoning, burning,
corrosion or environmental contamination.
By disposing of the equipment irresponsibly you may enable unauthorized persons to use it in
contravention of the regulations, exposing themselves and third parties to the risk of severe injury
and rendering the environment liable to contamination.
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national regulations in
force in your country.
Always prevent access to the product by unauthorized personnel.
EN
Safety Directions, GKL221