Table of Contents
Advertisement
Setting backlight
Light means the backlight of the Suunto X6
• Normal. The light goes on when you press the Start button for more than
2 seconds in any other mode than the Chrono mode. The light is on for 5 seconds
after the last press of any button.
NOTE: If the backlight setting is normal and you press the Start button in Chrono
mode, the Chrono is activated. If you want to use the light in the Chrono mode, you
have to set the backlight to Night Use.
• Off. The light does not go on from any button or during an alarm.
• Night Use. The light goes on when you press any of the buttons and stays on for
5 seconds after the last press of any button.
NOTE: The backlight goes on when an alarm sounds in Normal and Night Use.
NOTE: When the backlight is on, heart rate reception is interrupted.
To change the light setting
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to General and press Suunto. The General menu is
displayed.
3. Scroll to Light and press Suunto. The current light setting is displayed as active.
4. Select the light setting with the arrow buttons and press Suunto. The light setting is
set and you return to the function menu.
3.2.6. Units
The units menu includes the units that are used with all the Suunto X6
settings. The unit settings affect the way information is displayed in all the Suunto
X6
modes.
HR
display. Light has three possible settings:
HR
functions and
HR
27
Advertisement
Table of Contents
