ACTIVATING THE GPS HOW TO NAVIGATE AND STARTING THE TRACK LOG 1. Create a route. 2. Activate the route (the first waypoint is activated). 3. Choose the preferred navigation method. 4. Start Activity by choosing 5. Start navigating. Select a suitable activity status Main display ...
ROUTES Activating a route Creating a route Navigation data displays. The Set the content depends waypoint on the selected information navigation method. Repeat for other waypoints...
GPS SIGNAL QUALITY SELECTING A NAVIGATION METHOD Select a suitable navigation method Navigation methods To a single waypoint of a route To start - no route or WP selected To one point from MyPoints list...
It displays when the data was not sufficient. NOTE: The display is updated according to the selected GPS fix interval. NOTE: Suunto X9´s track log interval is automatically extended when you are not moving.
TRACK BACK TRACK BACK Track log Active track Select wait for GPS. Suunto X9 guides you back along the active track. Use the track back function to guide you to the nearest point of a previously recorded track, and after that to...
CONTACT INFORMATION *SUUNTO CALL CENTER +358 2 284 1160 SUUNTO USA 1 (800) 543-9124 SUUNTO CANADA 1 (800) 776-7770 *Calls charged at standard call rate to Finland...