Use; Altitude; Alarms - Suunto X6HR Instruction Manual

trip. You can also use marks to compare the difference in time and altitude between
two points of the trip. (Compare with the Differ function on page 41.)

3.5.3. Use

With the Use function you can define whether the air pressure measurement is used
to set the altitude or to represent the weather conditions. For more information, refer
to page 32.
To select either Altimeter use or Barometer use, follow these steps:
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Use with the arrow buttons and press Suunto.
The alti/baro field is activated.
3. Change the content of the field with the arrow buttons and press Suunto. You
return to the function menu.

3.5.4. Altitude

With this function you can set the reference altitude. For more information about the
reference altitude, refer to page 33.
To set the reference altitude, follow these steps:
1. To access the function menu, press Suunto in the main display.
2. In the function menu, scroll to Altitude with the arrow buttons and press Suunto.
3. With the arrow buttons, set the reference altitude in the field to match the altitude of
you current location and press Suunto. You return to the function menu.

3.5.5. Alarms

The altitude alarm is intended to warn you if you pass the preset altitude limit.
The ascent/descent alarm warns you if your ascent/descent rate is faster than the
46