When A Security Code Is Already Set - LG 32LV3710-TB Owner's Manual

When a security code is already
set
PIN (Personal Identification Number)
If your router is set to use a PIN, use the following
instructions.
1
Repeat step 1-7 on "Connecting to a wireless
network".
2
Press the Red button to connect the access
point with PIN mode.
3
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
PIN number is the unique 8 digit number of the
dongle.
4
Press OK to select Connect.
Connecting with PIN mode
Insert PIN number at the AP webpage and
press [Connect] button.
PIN NUMBER : 12345670
Connect
For more information, check the AP manual.
ꕉ Previous
5
Repeat step 6-7 on "Connecting to a wired
network".
ꔉ Next
ꕯ
Exit
WPS (Wi-Fi Protected Setup)
If your router or AP has a WPS button, it is the
easiest connection method. You simply press the
button on the router and then select the WPS on
the TV within 120 seconds.
1
Repeat step 1-7 on "Connecting to a wireless
network".
2
Press the Navigation buttons to select the
Simple setting (WPS-button mode).
3
Press the WPS button on your router.
4
Go back to the TV and select Connect.
5
Repeat step 6-7 on "Connecting to a wired
network".
49
ENTERTAINMENT