When Using 3D Glasses - LG 32LV3710-TB Owner's Manual

NOTE
(Only 47/55LW77 ** , 47/55LZ96 ** , 50/60PZ57 ** ,
50/60PZ95 ** )
After powering on the TV, a few seconds
y
may be needed for your TV to calibrate.
If there is an obstacle between the TV and
y
the 3D glasses, the 3D imaging may not
display properly.
Do not use the TV in close proximity to other
y
electronic equipments and RF equipments.
The 3D imaging may not display if it is
y
viewed while you are lying down.
It may take a moment for you to see the
y
3D imaging if you look away from the TV
and then revert your eyes back to the 3D
programme.
The TV may flicker slightly if the 3D imaging
y
is displayed under fluorescent. In such in-
stances, it is recommended to turn the lights
off or to dim the lights. (Only Plasma TV)
NOTE
If 3D TV broadcast standard changes in the
y
future and it is not supported by this TV set,
you may need a separate device, such as a
set-top-box.

When using 3D Glasses

CAUTION
Do not use the 3D glasses to replace your
y
corrective glasses, sunglasses or protective
goggles.
Do not store the 3D glasses in hot or cold
y
locations.
Do not drop objects onto the 3D glasses. Do
y
not drop or bend the glasses.
Since the lenses of the 3D glasses are
y
easily scratched, make sure to clean only
with a soft cloth. Shake off any dust before
using the cloth since the glasses are easily
scratched.
A communication failure may occur if the
y
glasses are near electronic devices that use
the same bandwidth (2.4 GHz), such as a
microwave oven or wireless LAN product.
95
3D IMAGING