Connecting To A Wireless Network - LG 32LV3710-TB Owner's Manual

NOTE
If you want to access the Internet directly on
y
your TV, the broadband internet connection
should always be on.
If you cannot access the Internet, check
y
the network conditions from a PC on your
network.
When you use Network Setting, check the
y
LAN cable or check if the DHCP in the router
is turned on.
If you do not complete the network settings,
y
the network may not work properly.
Connecting to a wireless net-
work
The LG Wireless LAN for Broadband/DLNA Adap-
tor, which is sold separately, allows the TV to con-
nect to a wireless LAN network.
The network configuration and connection method
may vary depending on the equipment in use
and the network environment. Refer to the setup
instructions supplied with your access point or
wireless router for detailed connection steps and
network settings.
Setting up the AP (Access Point) or the wireless
router is required before connecting the TV to the
network. The easiest method is the WPS button
method (Third method in this section).
(Only 47/55LW95 ** , 47/55LW98 ** : Built-in the
Wi-Fi Module, Unnecessary Wireless LAN for
Broadband/DLNA adaptor setup)
COMPONENT
IN 1
WIRELESS
CONTROL
AV IN 1
OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT ANTENNA ANTENNA/ ANTENNA
AUDIO IN AUDIO IN AUDIO IN
LAN RGB IN (PC)
AUDIO OUT CABLE IN
(RGB/DVI)
@
AV IN 2
AUDIO / VIDEO
COMPONENT IN 2 H/P
AUDIO / Y P P
B R
Internet
NOTE
For enjoying pictures, music or video stored
y
on a PC using the router, a wired connection
is recommended.
When the wireless port of the router is used,
y
there may be restrictions on some functions.
It is recommended that an Access Point
y
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than 1
m, the magic motion remote control may
not perform as expected due to frequency
interference.
47
ENTERTAINMENT
LAN WAN
Router
ETHERNET
Cable modem