When A Security Code Is Already Set - LG 32LV3710-TB Owner's Manual

28
ENTERTAINMENT
When a security code is already
set
PIN (Personal Identification Number)
If your router is set to use a PIN, use the following
instructions.
1
Repeat step 1-7 on "Connecting to a wireless
network".
2
Press the Red button to connect the access
point with PIN mode.
3
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
PIN number is the unique 8 digit number of the
dongle.
4
Press OK to select Connect.
Connecting with PIN mode
Insert PIN number at the AP webpage and
press [Connect] button.
PIN NUMBER : 12345670
Connect
For more information, check the AP manual.
ꕉ Previous
5
Repeat step 6-7 on "Connecting to a wired
network".
WPS (Wi-Fi Protected Setup)
If your router or AP has a WPS button, it is the
easiest connection method. You simply press the
button on the router and then select the WPS on
the TV within 120 seconds.
1
Repeat step 1-7 on "Connecting to a wireless
network".
2
Press the Navigation buttons to select the
Simple setting (WPS-button mode).
3
Press the WPS button on your router.
4
Go back to the TV and select Connect.
5
Repeat step 6-7 on "Connecting to a wired
network".
ꔉ Next
ꕯ
Exit
Ad-hoc Mode
Ad-hoc mode allows the TV to use a wireless to
connect to a computer without using a router or ac-
cess point.
1
Repeat step 1-5 on "Connecting to a wireless
network".
2
Press the Navigation buttons to select Setting
Ad-hoc network and press OK.
3
Press the Navigation buttons to select OK and
press OK.
4
Press OK to select Connect to connect Ad-hoc
network.
- You can see the Network ID and Security Key
on your TV screen.
- Enter this Network ID and Security Key to
your device.
- When needed, you can change the setting
information using the Red button.
NOTE
When searching for wireless networks on
your PC using ad-hoc, the TV is named
LGTV10.
y LGTV10 that appears in the list. (Select
y
the same name as the network ID that
appears on your TV screen.)
5
Press the Navigation buttons to type in an IP
address and press OK.
Option
y Internet Protocol(TCP/IP) of PC
y
needs to be set manually. IP ad-
dress, Subnet Mask, and default
Gateway can be set with your own
PC Setting
discretion.
» e.g.) IP address: 192.168.0.1 /
y
Subnet Mask: 255.255.255.0 /
default Gateway: 192.168.0.10
y Verify IP address and gateway of
y
PC. Input Gateway address of PC
to IP Address, and IP Address of
TV Setting
PC to Gateway, and select OK.
» e.g.) IP address: 192.168.0.10
y
/ Subnet Mask: 255.255.255.0 /
default Gateway: 192.168.0.1
6
Press the Navigation buttons to select Close
after Network setting is completed.
7
Press the OK.
Description