When A Security Code Is Already Set - LG 32LW5500 Owner's Manual

26
ENTERTAINMENT
When a security code is already
set
PIN (Personal Identification Number)
If you want to connect the AP (Access Point) or
router with PIN, use this feature.
1
Repeat step 1-7 on "Connecting the wireless
network".
2
Press Red button to connect the access point
with PIN mode.
3
You can see the Network ID and Security Key
on your TV screen.
Enter the PIN number to your device.
PIN number is the unique 8 digit number of the
dongle.
4
Press OK to select Connect.
Connecting with PIN mode
Insert PIN number at the AP webpage and
press 'Connect' button.
PIN NUBMER : 12345670
Connect
For more information, check the AP manual.
Previous
5
Repeat step 6-7 on "Connecting the wired
network".
WPS (Wi-Fi Protected Setup)
If your access point or wireless router that sup-
ports PIN or WPS(Wi-Fi Protected Setup), it's
available to use your access point or wireless
router within 120 counts. You do not need to know
the access point name (SSID: Service Set Identi-
fier) and security code of your access point or
wireless router.
1
Repeat step 1-7 on "Connecting the wireless
network".
2
Press the Navigation buttons to select the
Simple setting (WPS-button mode).
3
Press OK to select Connect.
4
Repeat step 6-7 on "Connecting the wired
network".
Ad-hoc Mode
This is the method of communicating directly with
the machine to communicate without AP.
This is the same as connecting two PCs with a
cross cable.
1
2
3
4
Example of the PC setting that supports a
wireless network
Next
Exit
5
6
7
Repeat step 1-5 on "Connecting the wireless
network".
Press the Navigation buttons to select Setting
Ad-hoc network and press OK.
Press the Navigation buttons to select OK and
press OK.
Press OK to select Connect to connect Ad-hoc
network.
- You can see the Network ID and Security Key
on your TV screen.
- Enter this Network ID and Security Key to
your device.
- If a network may not operate, change the set-
ting information using the Red button.
NOTE
Find a wireless network device in your PC.
Select LGTV10 that appears in the list.
(Select the same name as the network ID
that appears on your TV screen.)
Type 1111111111 in the Inserting the se-
curity key dialog. (Type the security key
that appears on your TV screen.)
Press the Navigation buttons to insert the IP
address and press OK.
Option Description
Internet Protocol(TCP/IP) of PC
needs to be set manually.
IP address, Subnet Mask, and
default Gateway can be set with
PC Setting
your own discretion.
i.e) IP address: 192.168.0.1 / Sub-
net Mask: 255.255.255.0 / default
Gateway: 192.168.0.10
Verify IP address and gateway of
PC.
Input Gateway address of PC to
IP Address, and IP Address of PC
TV Setting
to Gateway, and select OK.
i.e) IP address: 192.168.0.10 /
Subnet Mask: 255.255.255.0 /
default Gateway: 192.168.0.1
Press the Navigation buttons to select Close
after Network setting is completed.
Press the OK .