Table of Contents
Advertisement
Red
1
Steady Yellow
Green
Red
Steady Yellow
2
Blinking Yellow
Green
Red
3
Steady Yellow
Green
Red
4
Steady Yellow
Green
Red
5
Steady Yellow
Green
1.5.1
Numeric buttons
• Numeric buttons represented by the red group are mostly used in mode of watching TV
and they allow quick switch between the channels, as it is on standard TV.
• This buttons are also used for direct switch to the section offered in menus (e.g.:in the
main menu or in the settings menu, etc.). It is not necessary to enter the section by using
the combination of main cursor buttons (for selecting the section) and OK button (to
confirm the selection), just to click on "sequence number" of the section in the menu.
1.5.2
Volume control
Green group buttons control the volume as well as the Mute button, which is used to deaden
the volume immediately. In case the volume is deaden, it is possible to return to the original
volume level by clicking on Mute button or by using one of the volume control buttons.
1.5.3
Application buttons
Application buttons are used to switch between main STB applications.
Attention! Related description is positioned below the button.
Text Text button has two main functions:
No Ethernet link. The etherboot is unable to establish a
link, usually due to unplugged Ethernet cable or hardware
problems.
Getting IP address from DHCP (unless static IP addresses
are used.)
Link established and IP configuration successful.
Failed to get the bootcast information file or the boot image.
Trying to get the bootcast information file.
Trying to get the boot image and the splash screen image
specified in the bootcast information file.
Boot image received successfully.
Could not start the Kreatel Hardware Abstraction Layer.
Starting the Kreatel Hardware Abstraction Layer.
Kreatel Hardware Abstraction Layer started successfully.
Could not start the Kreatel IP-STB platform.
Starting the Kreatel IP-STB platform.
Kreatel IP-STB platform started successfully.
All applications set to be started initially were not started.
Starting all applications that are set to be started initially.
All applications set to be initially started have been started.
Table 1.1: Kreatel STB boot indicators
DocID:
STBGUIDE
Security level:
public
Page:
5 / 26
Revision:
40127 /bobek
5
Advertisement
Table of Contents
