Important Safety Instructions - Miele PT 7136 Plus User Manual

Read the operating instructions
before using this machine for the
first time. They contain important
information about the safety, use and
maintenance of the machine. Doing
so will prevent injury and damage to
the dryer.
Save these instructions and pass
them on to any future user.
WARNING - To reduce the risk
of fire, electric shock or injury:
Use
The dryer is intended for drying
clothes washed in water. Only dry
clothes with a fabric care label stating it
is safe for tumble drying.
Other uses may be dangerous. The
manufacturer cannot be held
responsible for damage caused by
improper use of the appliance.
Technical Safety
Check the packaging, the dryer
and accessories for any signs of
damage. Do not use a damaged
appliance.
Before connecting the machine,
ensure that the connection data on
the data plate (fusing, voltage and
frequency) matches the mains
electrical supply. If in doubt contact an
electrician.

IMPORTANT SAFETY INSTRUCTIONS

when continuity exists between the
machine and an effective grounding
system which complies with local and
national regulations. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified technician. The manufacturer
cannot be held responsible for damage
which is the direct or indirect result of
incorrect installation or connection.
extension cord. Extension cords do not
guarantee the required safety of the
appliance (e.g. danger of overheating).
Incorrectly repaired machines may
pose a considerable risk to the user
which are not covered by the
manufacturer. Repairs should only be
performed by a Miele approved
engineer.
parts. Only genuine Miele spare parts
can guarantee the safe operation of this
machine.
cord.
the electrical supply pulling the plug or
tripping the circuit breaker.
The electrical safety of this
appliance can only be guaranteed
Do not connect the appliance to
the mains electrical supply by an
The machine is built in accordance
with current safety requirements.
Faulty components must only be
replaced with genuine Miele spare
A faulty power cord must be
replaced by a genuine Miele power
Before maintenance or cleaning
and care disconnect the dryer from
3