Connecting A Pc; Displaying A Pc Image On The Screen; Selecting The Picture Size - Sharp Aquos LC-32LE700E Operation Manual

Connecting a PC

Connecting a PC
HDMI connection
PC

HDMI-certified cable
PC

DVI/HDMI cable
* When using the HDMI 2 terminal, you must select the proper
item in the "PC audio select" menu depending on the type of
HDMI cable connected (refer to page 25 for details).
Analogue connection
PC

RGB cable
PC

DVI/RGB conversion
cable
* When using the EXT 4 terminal, you must select "EXT 4 (RGB)"
in the "PC audio select" menu (refer to page 25 for details).
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 38 for a list of PC signals compatible with the TV.
LC-LE700E_GB3.indd 37 LC-LE700E_GB3.indd 37
HDMI 1, 2, 3 or 4
HDMI 2*

ø 3.5 mm stereo
minijack cable
EXT 4*

ø 3.5 mm stereo
minijack cable
EXT 4*

ø 3.5 mm stereo
minijack cable
Displaying a PC image on the
screen

Selecting the picture size

You can select the picture size.
1
Press f.
• The "WIDE MODE" menu displays.
2 Press f or a/b to select a desired item.
EXAMPLE
Normal
Item
Full An image fully fills the screen.
For letterbox pictures. Bars may appear
Cinema on the top and bottom with some
programmes.
Keeps the original aspect ratio in a full
Normal
screen display.
Displays an image with the same
Dot by Dot
number of pixels on the screen.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• Refer to page 31 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50 Hz)/1080i
• The ANALOGUE RGB (PC) terminal (EXT 4) is not compatible
with 480i/576i/1080p signals.
Full
37
2009/07/13 19:11:47 2009/07/13 19:11:47