Panasonic Lumix DMC-G1K Operating Instructions Manual page 87

Digital camera/lens kit
Table of Contents

Advertisement

If you set the shutter speed to [B], [B] is displayed on the screen.
When you take pictures with the shutter speed set to [B], use a sufficiently charged battery.
(P21)
We recommend using a tripod or the remote shutter (DMW-RSL1; optional) when you take
pictures with the shutter speed set to [B]. Refer to P132 for information about the remote
shutter.
When you take pictures with the shutter speed set to [B], noise may become visible. To avoid
picture noise, we recommend setting [LONG SHTR NR] in the [REC] mode menu to [ON]
before taking pictures. (P105)
The manual exposure assistance does not appear.
Note
It is possible to change the switching method of aperture and shutter speed settings with the
[EXPO. SETTINGS] (P109) in the [CUSTOM MENU] menu.
The brightness of the LCD monitor/Viewfinder may differ from the brightness of the actual
pictures. Check the pictures using the playback screen.
If the exposure is not adequate, the aperture value and the shutter speed turn red and blink
when the shutter button is pressed halfway.
[‡], [
], [
] and [
The [SENSITIVITY] is automatically set to [ISO100] when you switch the recording mode to
Manual exposure while the [SENSITIVITY] is set to [AUTO] or [
If you press the shutter button fully when the shutter speed is slow, the shutter speed on the
screen counts down.
When you use a lens with an aperture ring, the aperture ring setting takes priority.
] for flash cannot be set.
Advanced (Recording pictures)
] (Intelligent).
VQT1U44
87

Advertisement

Table of Contents
loading

Table of Contents