Printing The Pictures - Panasonic Lumix DMC-G1K Operating Instructions Manual

A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P33) in the [SETUP] menu has been executed
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
• When there is a picture with file number 999 inside the folder
∫ Connection in the PTP mode (Windows
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
mode.

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to
be printed out and instruct that printing be started on the camera's LCD monitor.
Preparations:
Turn on the camera and the printer.
Perform the print quality and other settings at the printer before printing the pictures.
Connect the camera to a printer via the USB connection cable A
(supplied).
A USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C DC cable (DMW-DCC3; optional)
• Use a battery with a sufficient battery power or the AC adaptor (P133). If the remaining battery
power becomes low while the camera and the printer are connected, the status indicator blinks
and the alarm beeps. If this happens during printing, stop printing at once. If not printing,
disconnect the USB connection cable.
•
When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears.
Do not disconnect the USB cable while [å] is displayed.
Connecting to other equipment
R R
XP, Windows Vista and Mac OS X only)
121
VQT1U44