Table of Contents
Advertisement
RCA ANT3900
4/29/03
9:19
Fig 3
Fig 4
6. Remove the LNB from the arm of the satellite dish
to expose the satellite cables. (see Fig 5).
7. Disconnect the satellite cable(s) from the satellite dish's
LNB and pull them out through the bottom of the satellite
dish arm (see Fig 5).
8. Connect the satellite cables to the terminals marked
OUT 1 and OUT 2 on the ANT3900 antenna (see Fig 6).
9. Slide the black 32"antenna cables up through the
satellite arm and connect to the LNB (see Fig 7).
10. Reconnect the LNB to the dish arm (see Fig 8).
11. Connect the remaining end of the black 32" antenna
cables to the IN 1 and IN 2 terminal on the ANT3900
antenna (see Fig 9).
12. Continue to "Step B: Installing the Inside Diplexers"
(page 8).
6
Page 6
Advertisement
Table of Contents
