Edimax WP-S1100 User Manual page 75

The description of every setting item will be described below:
Item
Config Mode
Configure via Push
Button
Configure via
Client PinCode
Description
Select WPS configuration mode: 'Registrar' (This
projector will accept WPS-compatible wireless client to
send WPS pairing request), and 'Enrollee' (This
projector server will send WPS pairing request to other
WPS registrar).
Click 'Start PBC' and projector server will enter 'WPS
Push-Button' mode. When using this mode, another
WPS-compatible wireless device must also enter WPS
push-button mode with different WPS configuration
mode (i.e. if projector server enters WPS push button
mode in 'Registrar' configuration mode, another
WPS-compatible wireless device must use 'Enrollee'
configuration mode; if projector server enters WPS
push button mode in 'Enrollee' configuration mode,
another WPS-compatible wireless device must use
'Registrar' configuration mode.
When you click this button, the button will be grayed-out
and start 2-minute count down. If no WPS-compatible
wireless device enters WPS push button mode within 2
minutes, WPS pairing will be cancelled.
Hint: You can also press 'WPS' button located on the
front of projector server to enter WPS mode, too.
If you got another WPS-compatible wireless device's
Self PinCode, you can enter it here, and press 'Start
PIN' button to start PIN-style WPS pairing.
75