Edimax WP-S1100 User Manual page 69

Encryption Key 1
to 4
Enable 802.1x
Authentication
RADIUS Server IP
address
RADIUS Server
Port
RADIUS Server
Password
When you finish, please click 'Apply' button to save changes you made; to
discard changes, click 'Cancel' button. If you click 'Apply', you'll see the
following message:
Click 'Continue' to continue on projector server setting, or click 'Apply' to
reboot projector server, and changes you made will take effect after projector
server rebooted.
Input WEP key characters here, the number of
characters must be the same as the number displayed
at 'Key Format' field. You can use any alphanumerical
characters (0-9, a-z, and A-Z) if you select 'ASCII' key
format, and if you select 'Hex' as key format, you can
use characters 0-9, a-f, and A-F. You must enter at least
one encryption key here, and if you entered multiple
WEP keys, they should not be same with each other.
Check this box to enable 802.1x authentication.
Please input the IP address of RADIUS authentication
server here.
Please input the port number of radius server here.
Please input the password of radius server here.
69