Table of Contents
Advertisement
ESSID
Channel Number
Associated Client
When you finish, please click 'Apply' button to save changes you made; to
discard changes, click 'Cancel' button. If you click 'Apply', you'll see the
following message:
2.4GHz (B+G+N) - supports 802.11b, 802.11g, and
802.11 Draft-n wireless clients.
Input the ESSID (Extended Service Set IDentifier, i.e.
the name used to identify this projector server among
other wireless access points) here.
Please note that client software also uses this name to
identify the projector server, even client software is
using wired Ethernet connection to connect to projector
server.
Default ESSID is 'projector'.
Select the wireless channel number used by the
wireless interface of projector server from dropdown
menu. The default channel is 11.
Click 'Show Active Clients' button to show all connected
wireless clients (wired clients will not be displayed
here).
Click 'Refresh' button to reload latest wireless client list.
59
Advertisement
Table of Contents
