Connecting To A Pc - Panasonic HDC-HS250P/PC User Manual

With a PC
2
Setup
p Connect this unit to the PC after the software applications are installed.
p Remove the supplied CD-ROM from your PC.
USB cable (supplied)
1
Connect this unit to the AC
adaptor.
p It is possible to use the unit connected to the
PC with the batteries only, but you will not be
able to write data into the unit.
2
Turn on the unit.
p This function is available in all modes.
3
Connect this unit to a PC.
The USB function selection screen will appear.
p Insert the USB connectors as far as they will go.
p Do not use any other USB cables except the
supplied one. (Operation is not guaranteed
with any other USB cables.)
4
Touch [PC].
p This unit is automatically recognized as an
external drive of the PC. (F 121)

Connecting to a PC

p When the unit is connected to a PC, its
power cannot be turned off.
Disconnect the USB cable, before turning
this unit off.
p Do not disconnect the USB cable or the AC
adaptor while the access lamp is on or card
access icon (
p Do not disconnect the USB cable or the AC
adaptor while the HDD access lamp is on or
HDD access icon (
screen.
) appears on the unit screen.
) appears on the unit
VQT1Y31
119