Table of Contents
Advertisement
w If the driver has not been
recognized properly
Use the following methods to enable it to be
recognized.
Method 1:
Turn off the unit and your PC once and try
verifying again.
Method 2:
Remove the SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your PC.
w To disconnect USB cable safely
1
Double click the
tray displayed on the PC.
p Depending on your PC's settings, this icon
may not be displayed.
2
Select [USB Mass Storage Device] and
click [Stop].
3
Verify [MATSHITA HDC-HS250/SD USB
Device] or [MATSHITA HDC-HS250/HDD
USB Device] is selected and click [OK].
120
VQT1Y31
(
) icon in task
Advertisement
Table of Contents
