Power Inverter - BPS C-100 User Manual

A
ccessories

POWER INVERTER

CONNECTING THE 150 WATT INVERTER TO THE BATTERY PACK
Connect the DC Input Cord to the DC Out Jack of the Battery Pack.

Connect the Inverter Adaptor Cord to the side of the Inverter.

Connect the cigarette lighter plug end of the Inverter Adaptor Cord

into the DC Input Cord of the Battery Pack.
Inverter Adaptor
Cord
DC Input Cord
CONNECTING YOUR DEVICE TO THE 150 WATT INVERTER
Connect the AC power cord of your device to the Inverter by sliding

open the small spring loaded tab located on the back of the Inverter,
which will reveal the two-prong plug.
If your device has a USB cable, you can connect the device to the

Inverter via the USB port located on the back of the Inverter.
Once the connection between the Battery Pack, Inverter and your device

is complete, press the ON/OFF button on your device and it should
start functioning.
USB Port



DC Out
Jack
Two-Prong Plug


Note: It is normal for the Inverter
to become warm to the touch and
to hear the internal fan operating
when in use.
Inverter
7