Aspect Controls - JVC GD-V422U Instructions Manual

ASPECT Controls

The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.
ASPECT
INPUT
SURROUND
VOL
N R
PICTURE SOUND SET UP
[During MULTI PIP Operations]
MULTI ZOOM
PIP SWAP SELECT MOVE
(1) Picture and Picture, Picture in Picture :
PICTURE (2) Others
POS. /SIZE ASPECT
Notes:
PC OFF TIMER
(1) For PC signal input, the mode switches between "NORMAL", "ZOOM" and "FULL" only.
(2) For a 1125 (1080) / 60i · 50i · 24p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input during
PLASMA DISPLAY
"COMPONENT" and "RGB" input signal mode, the mode is set to "FULL" mode, and switching is not possible.
Auto can be selected only during Video signal input.
(3) The aspect mode is memorized separately for each input terminal (INPUT1, INPUT2 , INPUT3 and PC IN).
Mode
4
NORMAL
NORMAL
4
ZOOM
4
FULL
4
JUST
4
For an elongated image
AUTO
4
For a 4:3 image
Notes: (1) Do not allow the picture to be displayed in 4:3 mode for an extended period, as this can cause a permanent
after-image to remain on the Plasma Display Panel.
(2) Using this function to display a picture with the aspect ratio changed from the original for the purpose of public
display or commercial gain may infringe on copyright laws.
ASPECT button
The aspect mode changes each time the
ASPECT button is pressed.
[from the unit]
- +
VOL
INPUT MENU ENTER
Picture
3
16
3
16
3
16
3
16
3
Image is expanded
Changes in accordance
with the AUTO mode
3
setting (see page 34).
The aspect mode changes each time the ENTER
button is pressed.
NORMAL
: Aspect switching is not possible.
NORMAL will display a 4:3 picture at its standard 4:3
size.
ZOOM
ZOOM mode magnifies the central section of the picture.
9
FULL
16:9 will display the picture at its maximum size but
9
with slight elongation.
JUST mode will display a 4:3 picture at its maximum
JUST
size but with aspect correction applied to the center of
the screen so that elongation is only apparent at the
9
left and right edges of the screen. The size of the picture
will depend on the original signal.
The display will automatically become enlarged
AUTO
(depending on the picture source), allowing you to view
the picture at its maximum size.
9
Note:
AUTO mode is designed to automatically adjust the
aspect ratio to handle a mix of 16:9 and 4:3 program
material. Certain 4:3 program material, such as stock
market data screens, may occasionally cause the image
size to change unexpectedly. When viewing such
programs, it is recommended that the ASPECT be set
to NORMAL.
NORMAL ZOOM
AUTO JUST
16 : 9
Explanation
FULL
19