114-GB(cover,p1-12)
IntelliLaser
The Stanley
to locate the position of studs, joists or live AC wires
through drywall and other common wall materials.
Once the edge of the stud has been detected, the
IntelliLaser
indications that allow you to easily pinpoint the stud's
edge position. A pencil line allows you to quickly note
the location of the stud edges.
The Stanley
vertically and pivoting 90 degree clockwise or counter-
clockwise to generate a laser straight line.
The IntelliLaser
and metal studs up to 3/4 inch for metal and wood
stud.
The IntelliLaser
for metal and wood stud modes, auto shut off and
heavy duty ABS construction.
Detection mode is selected by keypad function - metal
and wood stud. Default mode is wood stud detection.
Mode should be selected before "on" key is pressed.
25/08/2003
Pro (77-260)
™
Pro uses electronic signals
®
IntelliLaser
™
Pro LCD display gives visual and audio
™
Pro generates a laser plane
®
IntelliLaser
™
Pro allows the user to locate wood
™
Pro provides automatic calibration
™
–2–
10:49 AM
Page