Stanley IntelliLaser Pro Instruction Manual page 12

114-GB(cover,p1-12) 25/08/2003 10:49 AM Page
Conventional Construction
Doors and windows are commonly constructed
with additional studs and headers for added
Pro detects the edge of
stability. The IntelliLaser ™
these double studs and solid headers and emits
and holds an audio signal as it crosses over them.
Surface Differences
Wallpaper—There will be no difference in the
function of the stud sensor on surfaces covered
with wallpaper or fabric unless the coverings
contain metallic foil or fibers.
Plaster and Lath — Unless the plaster and lath is
exceptionally thick or has metal mesh in it there
will be no problem with the unit functioning
properly.
Ceiling or Textured Surfaces — When dealing
with a rough surface such as a sprayed ceiling, use
a piece of cardboard when scanning the surface.
Run through the calibration technique described
earlier WITH the piece of cardboard between the
stud sensor and the surface. Also, it is particularly
important in this application to remember to keep
your free hand away from the unit.
–10–