Advertisement
INSTALLATION START HERE
Wireless System Overview
The Sed 900 is designed to allow
a wireless reader on a handheld to operate back
to a master control station, and provide full wiegand
control.
The master control station has 2 wiegand outputs that
are selectable from the hand held.
This allows the badged card to be directed to the
IN or OUT ports on the master control unit.
Access
Control
NOTE: YOU MUST ALWAYS WIRE ALL CABLES SHOWN
FROM THE SED 900 TO THE ACCESS CONTROL SYSTEM. IF
YOU DON'T THE WIRLESS UNIT WILL NOT WORK
CORRECTLY
READER 1 WEIGAND OUT
Sed 900 M
READER 2 WEIGAND OUT
500m range line of sight
master
12v
Battery
1
HID
Advertisement
