FRAME/WHEELS/BRAKES
Wheel removal requires mechanical skill and professional
•
tools such as a torque wrench. We recommend it be done
only by your authorized Honda dealer or other qualified
mechanic.
NOTE:
For some temporary tubeless tire repairs, wheel removal
•
may not be necessary. See pages 30 - 31.
Refer to Maintenance Precautions on page 56.
1. Place the motorcycle on its center stand.
2. Remove the parts in sequance, according to the order in
the illustration.
Installation Notes:
•
Before installing the rear wheel, check that the wheel hub
and final drive gear splines are coated in grease.
•
Reverse the removal procedure.
Be sure the splines on the wheel hub fit into the final gear
•
case.
Before tightening the axel holding bolt, tighten the axel nut
•
to prevent misalignment.
75