Removal From Storage - Honda 1989 PACIFIC COAST PC800 Owner's Manual

STORAGE GUIDE
6. Wash and dry the motorcycle. Wax all painted surfaces.
Coat all chrome with rust-inhibiting oil.
7. Inflate the tires to their recommended pressure. Place the
motorcycle on blocks to raise both tires off the ground.
8. Cover the motorcycle (don't use plastic or other coated
materials) and store in an unheated area, free of dampness
with a minimum daily temperature variation. Do not store
the motorcycle in direct sunlight.

REMOVAL FROM STORAGE

1. Uncover and clean the motorcycle. Change the engine oil if
more than 4 months have passed since the start of storage.
2. Charge the battery as required. Install the battery.
3. Drain any excess aerosol rust-inhibiting oil from the fuel
tank. Fill the fuel tank with fresh gasoline.
4. Check the final drive oil, adding the recommended gear oil
if necessary. Change the final drive oil if necessary as
specified by the Maintenance Schedule. Perform all Pre
ride inspection checks (page 41). Test ride the motorcycle
at low speeds in a safe riding area away from traffic.
86