Removing The Video Board - JVC DX-T7 Service Manual

3.1.5 Removing the video board

(See Figs.11 and 12.)
• Remove the metal cover and DVD changer mechanism as-
sembly .
(1) From the back side of the main body, remove the four
screws G attaching the video board to the rear panel. (See
Fig.11.)
(2) From the top side of the main body, disconnect the card
wires from the connectors (CN920, CN931) on the video
board. (See Fig.12.)
(3) Take out the video board in the direction of the arrow while
removing it from the sections c of the mecha chassis. (See
Fig.12.)
1-14 (No.MB368)
G
Rear panel
Fig.11
Mecha chassis
CN920
c Video board
Fig.12
Video board
CN931
c