Viking CLASS I Installation Instructions Manual page 19

Class i, class ii, class iii, and class iv residential and commercial vehicular slide gate operator

Hide thumbs Also See for CLASS I:

Table of Contents

! TECHNICAL TIP:

Before completing the installation procedure;

• Open and close the gate manually, making sure there is sufficient space between the gate

and adjacent walls.

• Check that the wheels are turning freely on the track and there are no restrictions while

pushing the gate to the open and closed positions.

• Confirm that there is adequate spacing for the guide rollers and that there are no

restrictions throughout the travel of the gate.

STEP 1

Before securing the chassis to the

concrete pad or posts, make sure the

gate and operator are LEVEL and

PARALLEL. Minimum distance between

the operator and gate is 3".

STEP 2

Chain Installation: Before welding the

provided chain brackets, make sure the

chain will be in a straight line with, and at

the same height as, the chain leaving the

gate operator rollers.

VIKING TECHNICAL SUPPORT 1.800.908.0884

GATE OPERATOR INSTALLATION

14.375"

1 7

Table of Contents

Show Quick Links

Table of Contents

Class ii Class iii Class iv K-2 L-3