Additional Equipment For Old Directv Receivers - KVH Industries RV1 User Manual

TracVision RV1 User's Guide
Switching Satellites

Additional Equipment for Old DIRECTV Receivers

68
In addition to the DECA Broadband Kit or a Genie DVR, you might
need to connect an additional device to individual receiver(s),
depending on the model.
Old Receiver Models
H21, H22, H23, HR21,
HR22, HR23
H20*
* Model HR20-100 requires additional devices. Contact KVH Technical
Support for details.
Connect these additional device(s) in-line between the receivers and
the SWM splitter.
Figure 7-5 Additional Equipment for Older Receivers
H21, H22, H23, HR21, HR22, and HR23 Models
These receivers do not have built-in DECA functionality, but they have
an Ethernet port for network connectivity. An additional DECA (KVH
part no. 19-0860) is required for each of these receivers to support coax
networking, supplying the satellite TV signal to the receiver's "Satellite
In" port and network communications data to its Ethernet port. (If
there are two of each port, use the "Satellite In 1" and "Ethernet 1"
ports.)
NOTE: Each DECA that you connect directly to a receiver is powered by the
receiver. They do not require the separate power supply included in the
DECA Broadband Kit.
Additional Device Required
DECA (included in DECA Broadband
Kit), KVH part no. 19-0860
Band Stop Filter, KVH part no. 19-0868