Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Galaxy Audio RM2
Summary of Contents for Galaxy Audio RM2
-
Page 2: Table Of Contents
Please visit www.galaxyaudio.com for the latest updates. This manual covers the setup and operation of the Galaxy Audio RM2-Rack Chassis and the following optional Modules: RM-DIGIREC-Digital Recorder RM-DIGIPLY-Digital Player RM-TUNER-Digital AM/FM Tuner RM-CD-CD/MP3 Player RM-CDM-CD/MP3/SD/USB Player w/Remote RM-CDMV-CD/MP3/SD/USB Player w/Remote and Video Out... -
Page 3: Introduction
Cassette Players/Recorders, and AM/FM tuners. Various combinations of two modules can be installed into the single space RM2 rack chassis. The RM2 supplies power and provides rear panel inputs and outputs for the modules. The RM2 features dedicated Stereo RCA Outputs for each Module, a Priority Stereo RCA Output, a Stereo RCA Input for recording, and AM and FM antenna terminals. -
Page 4: Rm2 Front And Rear Panels
The RM2 features two dedicated stereo outputs, allowing the installed modules to be used as two separate devices in a single rack space. Applications include having the RM2 equipped with two different modules to service 2 different zones or rooms, such as in a restaurant, school, church, etc. -
Page 5: Rm2 Setup, Connections, And Specs
Power up the equipment in the order of signal flow, with the source devices first (including the RM2), then the mixer and processors, and finally the power amps last. This will prevent any loud switching “pops”... -
Page 6: Rm-Digirec
RM-DIGIREC-Digital Recorder One Galaxy Audio RM-DIGIREC, digital recorder, may be installed into the RM2, rack mount chassis along with one of the other modules. The RM-DIGIREC records to 44.1KHz MP3 format. The unit has an internal Flash memory, which will record about 2 hours of Stereo audio. An SD card can also be inserted (up to a 1 GB) for longer record time (about 16 hours of stereo audio). - Page 7 3.1 MODE key 3.2 EQ select: CLASSIC, POP, ROCK, JAZZ, or NORMAL (No EQ). 3.3 VOC mode 3.4 MP3 mode 3.5 = Recording Playing 3.7 ; Pause DEL.: Delete file A-B: A-B repeat 3.10 Repeat 3.11 Repeat All 3.12 LINE IN: Line in audio source available 3.13 Connecting to PC through USB 3.14...
- Page 8 delete the content of the track before you can re-record on that track. When the memory reaches 30 seconds remaining, the LCD will start to count from 30 down to1 second. 4.5 Play/; key: Select the track number you want to play, then press the PLAY key.
- Page 9 6. The DIGIREC features the following additional connectivity: 6.1 EAR: 1/8" stereo jack for earphones. Used to monitor Input Signals during recording or Output during play mode. :USB connector to transfer data to or from a computer. 6.3 SD Card Slot: For extended SD memory card (up to 1GB). (When using a 512 MB SD card, the recording time available is over 8 hours.) 6.4 MIC IN: Stereo (L &...
- Page 10 chosen track number, for example 03 would be track no. 3) C-2: If you want to playback the MP3 file from an SD card in VOC mode, you must re- name it as M_EXT_xx.MP3 (xx is where you would enter the chosen track number, for example 03 would be track no.
-
Page 11: Rm-Digirec Specifications
RM-DIGIREC-Digital Recorder Specifications Record/Play Format: MP3 Sample rate: 44.1KHz, 128 Kbps Internal Memory: 128MB NAND flash memory (records about 2 hours) SD Card Slot: (up to 1 GB SD Card, records about 16 hours) Recording Inputs: (2) ¼” Mic, with Input Level Control (2) Line Level Stereo RCA Jacks (rear panel) USB 1.1 connector: For file transfer to or from a computer 5 EQ modes: Normal, Classic, Pop, Rock, and Jazz. -
Page 12: Rm-Tuner
RM-TUNER-Digital AM/FM Tuner The RM-TUNER Digital AM/FM tuner has a range of 87.5 MHz-108 MHz (FM) and 530 KHz-1720 KHz (AM). The RM-TUNER can be used worldwide. There are 20 programmable station memory presets, (10 AM and 10 FM), and a sleep function that is programmable from 10 to 90 minutes. The RM- TUNER will also retain it settings when power is lost or switched off, and the unit has a volume control located on the front panel. - Page 13 Radio Station Memory Function. 20 Station Presets available (10 AM / 10 FM). Stations may be preset to memory by using either of the following two methods: 1.) Tune in desired station. Press “ 7 “ (MEMORY), then press the desired memory location “...
-
Page 14: Rm-Tuner Specifications
RM-TUNER-Digital AM/FM Tuner Specifications AM/FM Digital Tuner 20 station memory presets (10 AM/10 FM) LCD Display Sleep function Station scan search Radio Tuning Range: FM 87.5 MHz–108 MHz / AM 530 KHz–1720 KHz RM-CD-CD/MP3 Player CD/MP3 player LCD display Volume control Track selector Play, Pause, Stop function The RM-CD CD/MP3 player will play standard audio CDs as well as user... -
Page 15: Rm-Cd
RM-CDM-CD/MP3/SD/USB Player w/Remote Plays Wave and MP3s from CD Plays MP3's from SD Cards and USB Input Remote control Pitch Control RM-CDMV-CD/MP3/SD/USB Player w/Remote and Video Out Plays Wave and MP3s from CD Plays VCD, CDG, JPG discs Video Output Jack Plays MP3's from SD Cards and USB Input Remote control Pitch Control... - Page 16 HI – PITCH: Press to raise speed and pitch. (10 steps of speed variation)ia status including track number and playing time. NOR – PITCH: Press once to return speed and pitch to normal. LCD Display: MP3: Indicates MP3 mode is active. CD: Indicates CD mode is active.
-
Page 17: Remote Functions
Note: When inserting/removing a disc please allow the CD player to pull/return the disk automatically. Do not pull or push the disk by hand as damage may result. SD/MMC Card Insert an SD Card or MMC Card into the card slot on the front panel. Push the card until it locks in place. - Page 18 you wish to program. For example: If you press "5”, and press the key, the LCD will display "05:02", and so it has set "23" and "05" as memorized songs. Press the play key to start play of all of the memorized songs.
- Page 19 playing the selected format. Activates the zone memory function. During playback, press to set the start point (A). Press again to set the end point (B), and the unit will repeatedly play from point A to point B. Press again to cancel the Aà...
-
Page 20: Rm-Cassp
RM-CASSP-Cassette Player DESCRIPTION: OPERATION: POWER ON Press “1” Power Switch to turn on the unit; “2” Power LED will be lit constantly until “1” is pressed again. OPERATIONS & FEATURES Insert a cassette into the “4” Cassette Tape Slot. The tape will start and play continuously unless you press the Eject or Pause button. -
Page 21: Rm-Cass
LEVEL Rotate “9“ LEVEL to adjust the volume. POWER OFF Press “3” Eject Button to eject the cassette from the machine, then press “1” to switch off the power. RM-CASS-Cassette Player/Recorder DESCRIPTION:... - Page 22 OPERATION: POWER ON/OFF Press “2” Power Switch to turn on the unit; “3” Power LED will be lit constantly until “2” is pressed again. Tape Counter “10” will display zero (000). Both LED's “7” & “8” will flash twice, then the indicator of “4” will light. OPERATIONS &...
- Page 23 TAPE RECORDING: Connect the line level output of the source device, of which you wish to record, to the stereo RCA REC IN jacks on the RM2 rear panel. Insert a blank cassette into the tape slot “1”. Press “12” once to enter “Record Standby” and “6” will be lit. For Side-A recording press “15”, and indicator “7”...
-
Page 24: Limited Warranty
5. Damage occurring during the shipment or delivery of any Galaxy Audio product to Galaxy Audio after initial delivery of the product to you. 6. Damage to any Galaxy Audio product which has been altered or on which the serial number has been effaced or removed.