Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Galaxy Audio Manuals
  4. CD Player
  5. RM-CD
  6. Manual

Galaxy Audio RM-CD Manual

Anti shock cd / usb / sd card reader / remote control player
Hide thumbs Also See for RM-CD:
1
2
3
4
5

Advertisement

Quick Links

Download this manual
Anti Shock CD / USB / SD Card Reader / Remote Control Player
DESCRIPTION OF CONTROLS:
 POWER: ON: Press Power button to switch on the power. OFF: Press and hold to
switch off the power.
 CD / USB / SD: Press this key to select USB, SD, or CD mode.
 REV: Press and release to select previous track number. Press and hold for fast
reverse.
 F.WD: Press and release to select next track number. Press and hold for fast forward.
 PLAY / PAUSE: Press once to play, press again to pause.
 STOP/ EJECT: Press once to stop play. Press again to eject disc.
1. When stopped the LCD will display all track numbers.
2. When pressed again the LCD shows "EJECT". Press again to re-insert the disk.
 Infrared window: Picks up the signal from the remote control.
 USB Connector: Used to play MP3 files from an external source.
 SD Card Slot: Accepts SD and SDHC Cards containing MP3 files.
 FOLDER
 FOLDER
 MUTE: Press to mute audio.
 SHU. / ENTER: Shuffle and execute button. Press once to activate shuffle feature. The
LCD display will show "SHUFFLE" and start to play from available tracks. When in the
programming mode, this button will execute the ENTER command.
 PROG: Press to program the order of track play.
1. To program WAV files from CD media: Press once till the LCD display shows
"PROGRAM", then use the SKIP previous or next buttons to select the first track.
Then press the ENTER button. Repeat SKIP and ENTER commands to program
additional tracks. When finished, press PLAY. The LCD will show "MEMORY" and
start to play the programmed tracks.
2.
To program MP3 files from CD, USB, or SD media: Press once till the LCD display
shows "PROGRAM" then press
then use the SKIP previous or next buttons to select the first track. Then press the
ENTER button. Repeat SKIP and ENTER commands to program additional tracks.
When finished, press PLAY. The LCD will show "MEMORY" and start to play the
programmed tracks.
RM-CD
: Press to select next folder.
: Press to select previous folder.
FOLDER
to select the desired folder,

Advertisement

loading

Related Manuals for Galaxy Audio RM-CD

Summary of Contents for Galaxy Audio RM-CD

  • Page 1 Anti Shock CD / USB / SD Card Reader / Remote Control Player RM-CD DESCRIPTION OF CONTROLS:  POWER: ON: Press Power button to switch on the power. OFF: Press and hold to switch off the power.  CD / USB / SD: Press this key to select USB, SD, or CD mode.

  • Page 2: Lcd Display

    ：Displays the time for the current playing track. MEMORY: When playing, if the unit is switched off and then back on, or switched to another mode and then back to the former playing mode, the RM-CD will play automatically from the previous status. PLAYING: ...

  • Page 3: Functions Of The Remote Control

    Note:  When inserting or removing a disc from the CD slot, please allow the RM-CD to insert and return the disc automatically. Damage may result from pushing in or pulling out the disk by hand.  Insert a USB device or cable into the USB connector in the faceplate.
  • Page 4  : ON / OFF Audio Mute.  : Enter command.  When using the remote control, point the remote to the faceplate of the RM-CD. The optimal transmitting distance is 3 meters. The remote control battery is model CR2025,...
  • Page 5  Battery installation: 1. Press and hold the tenon located on the lower left-hand corner of the rear of remote control. Pull out the battery holder. 2. Install the battery according to its correct polarity (positive electrode faces upwards). 3. Push the battery holder back into the remote until it locks in position.