Loose Fuel Filler Cap Message; Vehicle Loading; Vehicle Certification Label - Chrysler Vehicle Owner's Manual

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel
filler cap is loose, improperly installed, or damaged, a
"gASCAP" message will display in the odometer or a
"CHECK GASCAP" message will be displayed in the
Electronic Vehicle Information Center (EVIC). Refer to
"Electronic Vehicle Information Center" in Section 4 of
this manual. Tighten the fuel filler cap until a "clicking"
sound is heard. This is an indication that the fuel filler
cap is properly tightened. Refer to "Onboard Diagnostic
System — OBD II" in Section 7.
If the problem continues, the message will appear the
next time the vehicle is started. See your authorized
dealer as soon as possible.

VEHICLE LOADING

As required by National Highway Traffic Safety Admin-
istration regulations, your vehicle has a certification label
affixed to the driver's side door or B-Pillar.
If seats are removed for carrying cargo, do not exceed the
specified GVWR and GAWR.

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label attached to
the driver's door B-Pillar.
The label contains the following information:
• Name of manufacturer
• Month and year of manufacture
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR) — Front
• Gross Axle Weight Rating (GAWR) — Rear
• Vehicle Identification Number (VIN)
• Type of Vehicle
• Month, Day and Hour of Manufacture (MDH)
The bar code allows a computer scanner to read the
Vehicle Identification Number (VIN).
STARTING AND OPERATING 371
5