Clock Setting Procedure - Rer Radio - Chrysler Vehicle Owner's Manual

250 UNDERSTANDING YOUR INSTRUMENT PANEL
3. When this feature is on, a check mark will appear in
the box next to the words "Show Time if Radio is Off."
Touch the screen where the words "Show Time if Radio is
Off" are displayed to change the current setting.
Changing the Time Zone
1. Turn on the radio.
2. Touch the screen where the time is displayed. The
clock setting menu will appear on the screen.
3. Touch the screen where the words "Set Time Zone" are
displayed. The time zone selection menu will appear on
the screen.
4. Select a time zone by touching the screen where your
selection appears. If you do not see a time zone that you
want to select, touch the screen where the word "Page" is
displayed to view additional time zones in the menu.
5. Touch the screen where the word "Save" is displayed.
Clock Setting Procedure — RER Radio
uconnect gps
The GPS receiver used in this system is synchronized to
the time data being transmitted by the GPS satellite. The
satellite clock is Greenwich Mean Time (GMT). This is the
worldwide standard for time. This makes the system's
clock very accurate once the appropriate time zone and
daylight savings information is set.
To Manually Set the Clock
1. Turn on the radio.
2. Touch the screen where the time is displayed.
3. Touch the screen where "User Clock" is displayed, the
clock setting menu will appear on the screen.
4. To move the hour forward, touch the screen where the
word "Hour" with the arrow pointing upward is dis-
played. To move the hour backward, touch the screen
where the word "Hour" with the arrow pointing down-
ward is displayed.