Driven Pulley Unit Assembly; Housing Assembly; Driven Pulley Axle Support Assembly; Driven Pulley Axle Support Bearings Disassembly - PIAGGIO 500 cc Service Manual

Driven pulley unit assembly

- Fit the driven pulley unit and relevant belt.

Housing assembly

- Fit the housing and the spacer

Driven pulley axle support assembly

- Make sure the 2 centering dowels are properly fitted
in the crankcase.

Driven pulley axle support bearings disassembly

- Check that the bearing turns freely. Replace the
bearing if necessary.
- Remove the snap ring.
3 - 12
Automatic transmission
05_045
05_046
05_047
05_037