Garmin GPS 400W Installation Manual page 98

TO-FR (LAT)
Selection
FROM
Hide
TO
SELECTED COURSE
Select 150° on the CDI/HSI that is connected to the 400W Series VOR/LOC/GS OBS inputs. The
SELECTED COURSE field should indicate near to 150° and a Calibrate to 150°? field appears.
Selecting this field calibrates the 400W Series to match the input source. Verify OBS operation by
checking that the course displayed on the 400W Series is within 2° of the selected course. Do this at 30°
intervals around the OBS card.
DME CHNL MODE
This configuration allows you to set the format for DME tuning data output.
Selection
King serial
Parallel 2x5
Parallel BCD
Parallel slip
Narco 890/891
Page 5-20
Rev. G
Verify That:
The FROM flag is in view.
The TO/FROM flag is hidden.
The TO flag is in view.
Description
King Serial DME tuning data
2 of 5 parallel DME tuning.
Shifted BCD (Binary Coded Decimal) parallel DME tuning
Slip-code parallel DME tuning
2 of 5 parallel DME tuning, compatible with the following DME units:
Narco DME 890
Narco DME 891
ARC (Cessna) RTA-476A
GNS 400W Series Installation Manual
190-00356-08