Glideslope Specifications (Gns 430W Only) - Garmin GPS 400W Installation Manual

Gns 400w series
Hide thumbs Also See for GPS 400W:
Table of Contents

Advertisement

1.4.7

Glideslope Specifications (GNS 430W Only)

Sensitivity
Centering Accuracy
Selectivity
Standard deflection
Flag
GNS 400W Series Installation Manual
190-00356-08
-87 dBm or less for 60% of standard deflection.
0
.0091 ddm or 0
7.8 mV
The course deviation shall be 0 ddm
Glideslope Centering Test Signal as the RF frequency is varied 17
kHz from the assigned channel.
At frequencies displaced by 132 kHz or greater, the input signal is
at least 60 dB down.
a) With a standard deflection „FLY DOWN‟ condition (90 Hz
dominant), the output shall be -78 mV ± 7.8 mV.
b) With a standard deflection „FLY UP‟ condition (150 Hz
dominant), the output shall be +78 mV ± 7.8 mV.
The unit Flags:
a) When the level of a standard deviation test signal produces
50% or less of standard deflection of the deviation indicator.
b) In the absence of 150 Hz modulation.
c) In the absence of 90 Hz modulation.
d) In the absence of both 90 Hz and 150 Hz modulation.
e) In the absence of RF.
.0091ddm when using the
Page 1-7
Rev. G

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gns 430 awGnc 420awGnc 420wGns 430w

Table of Contents