Electrical Operation - Dometic RM 8400 Operating Instructions Manual

Refrigerator operation

4.3.1 Electrical operation

Appliances with battery igniter
(manual energy selection)
1
Fig. 12
Switch on the appliance by turning the energy
selection switch "1" clockwise to position :
230V operation,
MES Appliances (manual energy selection)
1
Mode
To start the refrigerator, press button "1" for 2
seconds.
The LED of the previously selected operating
mode illuminates:
230V
Change the operating mode by pressing button
"1" again. The appropriate indicator LED will
illuminate.
Fig. 13
12V operation.
F
Fig. 14
, or .
12V GAS
AES Appliances (automatic energy selection)
1
Mode
Fig. 15
To start the refrigerator, press button "1" for 2
seconds.
The previously selected operating mode is dis-
played, e.g. 230 which means 230V .
By pressing button "1" again, you may change
the operating modes to::
AU (automatic energy selection)
230V,12V, GAS (manual energy selection)
Upon switching on, the electronics automati-
cally selects one of the three possible energy
types: 230V - 12V - liquid gas. The control elec-
tronics automatically ensures that the refrigera-
tor is supplied with the optimum source of ener-
gy in each respective case.
Sequence of priority: 1.) Solar (12V -)
If sufficient mains voltage is available (more than
195 V), this power source is selected as prime
option. If a solar system capable of powering
the refrigerator is installed, the solar 12V supply
takes priority.
The 12V operation is otherwise only effective
while the engine is running. The appliance
electronic system features a low-voltage
mechanism. Once the voltage drops below
10.5V, the appliance shuts down (manual
mode) or switches over to a different energy
source (AU mode).
16
6
Fig. 16
2.) 230V ~
3.) 12V -
4.) Liquid gas